How to Create and Use a Ramdisk on Ubuntu 18.04

The slowest part of a computer is the hard drive. So loading program and files from hard drive is really slow. RAM or Random Access Memory stores program data and important machine code that are current being used by your computer. RAM is very fast, hundreds of times faster than hard drives. So you may be thinking, why don’t we use RAM instead of hard drives? Well, firstly RAM is not as cheap as hard drives. So your system has limited amount of RAM. The other major problem is, RAM is a temporary storage device. So when you shutdown your computer or the power goes off, all the data of your computer’s RAM will be erased.

Does that mean we can’t store ordinary data on RAM? Well, we actually can. If you don’t care about your data being lost, then you can use RAM as disk. Which is called RAMDISK. This solution is very effective if your computer has backup power supply that can keep your computer running for a long time even when the power goes off.

There is actually a way to use RAMDISK to store files permanently. Let’s say you have a 4 GB RAMDISK setup. You can store and access files here very fast. Of course, this is temporary storage. To fix that problem, we can use a hard drive and sync all the files and directories of our RAMDISK automatically with specific backup softwares. Even though hard drive is slow, and it may take a while to sync a hard drive with a RAMDISK, at least the data will be stored permanently. So when you shutdown your computer, RAMDISK will be erased. When you start your computer again, all the data will be copied from your hard drive to your RAMDISK. This process will be slow. But after the data is copied, you can again access the data very fast. So basically RAMDISK is used as a cache here.

In this article, I will show you how to create and use RAMDISK on Ubuntu 18.04 LTS. To watch a video of this process see video below:

Creating a RAMDISK:

Creating a RAMDISK on Ubuntu 18.04 LTS is really easy. All the tools required is already pre-installed on Ubuntu 18.04 LTS.

First create a mount point where you will be mounting the RAMDISK with the following command:

$ sudo mkdir /mnt/ramdisk

Now you can mount the RAMDISK to the /mnt/ramdisk mount point with the following command:

$ sudo mount -t tmpfs -o rw,size=2G tmpfs /mnt/ramdisk

NOTE: Here, size=2G means, the RAMDISK will be 2 GB in size. To create RAMDISK of several MB, use M. For example, to create 256 MB RAMDISK, put size=256M

Now to verify whether the RAMDISK is created, run the following command:

$ df -h

As you can see, the RAMDISK is created and mounted on /mnt/ramdisk as expected.

You can use the RAMDISK as you use ordinary hard drive partitions. As you can see from the screenshot below, I copied several files and directories into the RAMDISK. I can even edit text files directly from RAMDISK.

To unmount the RAMDISK, run the following command:

$ sudo umount /mnt/ramdisk

WARNING: All the files in your RAMDISK will be lost.

Mounting RAMDISK Automatically on System Boot:

You can use the /etc/fstab file to automatically mount the RAMDISK on system boot.

First, make a backup of /etc/fstab file with the following command:

$ sudo cp -v /etc/fstab /etc/fstab.backup

A copy of the file /etc/fstab is saved to /etc/fstab.backup. Now If anything goes wrong on the way, you can just restore the /etc/fstab file.

Now open /etc/fstab file with the following command:

$ sudo nano /etc/fstab

/etc/fstab file should be opened.

Now go to the end of the file and add the following line:

tmpfs  /mnt/ramdisk  tmpfs  rw,size=2G  0   0

NOTE: Here size=2G means, the size of the RAMDISK will be 2 GB. To specify the size in MB, use M instead of G.

Now press <Ctrl> + x and then press y and then press <Enter> to save the file.

Now reboot your computer with the following command:

$ sudo reboot

The RAMDISK should be mounted as you can see from the marked section of the screenshot below.

Persisting RAMDISK Data:

In this section, I will show you how to save RAMDISK data to hard drive on system shutdown and load data from hard drive to RAMDISK on system boot.

For this to work, the directory where the RAMDISK will be mounted and where the backup data will be saved must have the same file permission set. I will show you an easy trick. Stay tuned.

First create a directory where RAMDISK data will be saved on system shutdown with the following command:

$ sudo mkdir /mnt/ramdisk_backup

If you’ve followed this article from the start, then the RAMDISK should be mounted on /mnt/ramdisk

Now create a system service file with the following command:

$ sudo nano /lib/systemd/system/ramdisk-sync.service

Now type in the following lines and replace shovon as marked in the screenshot below with your login username. Don’t forget this step as it won’t work otherwise. Now save the file.

Now enable the ramdisk-sync service with the following command:

$ sudo systemctl enable ramdisk-sync.service

The ramdisk-sync service is enabled. Now it will start automatically on system boot.

Now reboot your computer with the following command:

$ sudo reboot

Once your computer starts, check whether the ramdisk-sync service is running with the following command:

$ sudo systemctl status ramdisk-sync

As you can see, the service is running correctly.

As you can see, both the /mnt/ramdisk and /mnt/ramdisk_backup directories are empty.

$ ls /mnt/ramdisk{,_backup}

Now I am going to copy some files to /mnt/ramdisk RAMDISK.

Now reboot your computer.

$ sudo reboot

As you can see, once my computer boots, the files are available in my RAMDISK /mnt/ramdisk

Also the /mnt/ramdisk and /mnt/ramdisk_backup contains the same files.

$ ls /mnt/ramdisk{,_backup}

That’s how you create and use RAMDISK on Ubuntu 18.04 LTS. Thanks for reading this article.

ONET IDC thành lập vào năm 2012, là công ty chuyên nghiệp tại Việt Nam trong lĩnh vực cung cấp dịch vụ Hosting, VPS, máy chủ vật lý, dịch vụ Firewall Anti DDoS, SSL… Với 10 năm xây dựng và phát triển, ứng dụng nhiều công nghệ hiện đại, ONET IDC đã giúp hàng ngàn khách hàng tin tưởng lựa chọn, mang lại sự ổn định tuyệt đối cho website của khách hàng để thúc đẩy việc kinh doanh đạt được hiệu quả và thành công.
Bài viết liên quan

Ubuntu 18.04 LTS Minimal Install Guide

The default Ubuntu desktop is heavy on resources. It requires a lot of RAM, hard disk space, good GPU and CPU to work perfectly....

How to install Vivaldi 1.11 on Ubuntu – New Browser Icon

Vivaldi 1.11 recently released, comes with a host of new features, some of which includes a brand-new application icon...

IntelliJ IDEA 2016.3.4 Community Edition out, Install on Ubuntu, CentOS

IntelliJ IDEA 2016.3.4 Community Edition recently released, is the most Intelligent IDE for the Java Platform as well as...