Bash declare command

Bash doesn’t have a strong type system. To allow type-like behavior, it uses attributes that can be set by a command. ‘declare’ is a bash built-in command that allows you to update attributes applied to variables within the scope of your shell. In addition, it can be used to declare a variable in longhand. Lastly, it allows you to peek into variables.

Here you will find out that you are blind or using the bash declare command.

At this point you are thinking, what do I need to know to use the declare command in bash? At the time like these, the man command comes in handy. I’m just going to paste the part about declare in bash builtins here.

Here are some help commands to see what it looks like in your terminal. Note that the last one is a failsafe for our friends running Git Bash in Windows.

Help commands for bash declare

  • man bash (and find the section about declare
  • or bash help declare

Now that you have read the primer, man page for declare in bash, it is time to get our hands dirty with some examples of bash declare in the wild. Note that as you scroll down deep into the jungle of bash declare examples, your pay grade and level of understanding of declare will improve.

First let’s start out by seeing if anyone declared a variable called bar. If no one has yet, dibs!

declare -p bar

If you see the error bash: declare: bar: not found, then no one has yet. Let’s just echo $? to be sure.

1, okay good. Otherwise, you should see something like declare -- bar="". If you haven’t yet, go ahead and declare bar as something, bar= or declare bar= should do the trick. Note that the latter of the two is the longhand for variables in bash. If you are wondering what the -- in declare output is, that is where variable attributes go, and there are none.

Now that assigning variables using declare is out of the picture, let’s start giving them attributes.


If you are running bash v4.3-alpha or later, this section on the -n option. If you are not sure, check using the bash --version command. Otherwise, don’t try this at home.

declare –n foo=bar

Look at that. We just asigned a variable to another by name. Look what happens here.

declare -n foo=bar
echo ${foo} ${bar} #  x x
echo ${foo} ${bar} #  y y

Now look what happens when when we don’t use declare with the -n option.

declare foo=bar
echo ${foo} ${bar} #  x x
echo ${foo} ${bar} # y x


Now suppose that we tried to do something odd like this:

echo{,} ${bar} >

As you may suspect, nothing happened in standard output. Don’t worry about the voodoo in the first line. Programmers are lazy.  The declare command can make names export!

declare -x bar # export bar

Now give it a try.

bash # x

Note that using the –x option for declare can also be done through the export command as follows. Be sure to open up a new shell or remove the attribute using the +x option before trying out the following example.

echo{,} ${bar} >
bash #
export bar
bash # x


In bash, variables may have the integer attribute and the only way to accomplish this is through declare command.

Suppose that we are dealing with integers and want to make our variables behavior more responsible. We could give such variables the integer attribute using the –i option for declare.

declare –i bar # don’t know what’s in bar anymore but now it’s an integer
echo ${bar} # x (maybe)
echo ${bar} # 0
echo ${bar} # 1
bar=3.14 # ouch

Note that now when we try to assign a new value to our variable 3 things happen: 1) The value is interpreted as 0; 2) The value is interpreted as an integer; 3) Error.

In addition to modifying the value assignment behavior, variables now behavior differently in arithmetic expressions as follows.

declare -i bar=1
declare car=1
echo ${bar} # 1
echo ${car} # 1
echo ${bar} # 2
echo ${car} # car+1

Note that you can still get away with using a variable to store an integer and carry out arithmetic without setting the integer attribute for a variable but it is there just in case.


In bash, variables may have case attributes applied on assignment. Declare allows conversion to cases lower or upper if –l or –u options are set, respectfully.

declare -u uppers=
declare -l lowers=
echo ${uppers} # UPPERCASE
echo ${lowers} # lowercase
echo ${uppers,,} # uppercase
echo ${lowers^^} # LOWERCASE

These attributes may come in handy if you require single case without having to do the conversion yourself.


In bash, variable may be readonly. To accomplish this there is the -r option for declare.

declare –r lowers # try to make lowers final
lowers="Yet another lowers"
echo ${lowers} # yet another lowers
declare -rl final_lowers="Yet another lowers"
echo ${final_lowers} # yet another lowers
final_lowers="Yet again another lowers" # assignment block

This attribute could come in handy if you know that a variable has no business being changed after assignment. Note that the +r option does not work; that is stripping a variable of its readonly attribute is not allowed in bash.


In bash, variables may be arrays. To make a variable an associative or indexed array, the –A and –a options for declare are used, respectfully.

declare -a indexed_array
declare -A associative_array
indexed_array[one]=2 # ?
echo ${indexed_array[0]} # 2
echo ${associative_array[0]} # 1
echo ${indexed_array[one]} # 2
echo ${associative_array[one]} # 2
declare -p indexed_array
declare -p associative_array
echo ${indexed_array[2one]} # ouch

In most programming languages having the ability to use arrays is a powerful construct. Bash is no exception. It allows this through array attributes which could come in handy if requiring hash lookup or in implementing object-like behavior. Note that the index of indexed arrays behaviors like a variable with the integer attribute, thus is expected to break in the same manner, hence the last line before true.


In bash, variable may have the trace attribute applied via the -t option in declare. Trace variables unlike variables with other attributes applied depend heavily on the environment of the calling shell.

I have found mixed results using the trace attribute which have led to a review on traps and applications of trapping the DEBUG and RETURN signal. For those that tinker, finding a use for declaring a variable with the -t option is extra credit.


In bash, one of the most useful uses for the declare command is being able to display functions. The -f and -F options for declare display definition and just function names if available, respectfully.

Suppose that you want to have a fallback in case a function is not defined in your shell. We can use declare to accomplish this task as follows. For simplicity sakes, let’s use a function called foo.

# if foo is not declared
# declare it
# else use available foo
test ! "$( declare -F foo )” || {
foo() { true ; }

For those that tinker, there is an alias using called commands that I cooked up a while back that uses declare to check if functions are available.


Although most programmers can get away with not having to use it at all, like most builtins, the declare command in bash is an essential command to really know your way around the bash shell.

ONET IDC thành lập vào năm 2012, là công ty chuyên nghiệp tại Việt Nam trong lĩnh vực cung cấp dịch vụ Hosting, VPS, máy chủ vật lý, dịch vụ Firewall Anti DDoS, SSL… Với 10 năm xây dựng và phát triển, ứng dụng nhiều công nghệ hiện đại, ONET IDC đã giúp hàng ngàn khách hàng tin tưởng lựa chọn, mang lại sự ổn định tuyệt đối cho website của khách hàng để thúc đẩy việc kinh doanh đạt được hiệu quả và thành công.
Bài viết liên quan

tput, printf and shell expansions: how to create awesome outputs with bash scripts?

1. Why are good outputs so important in bash scripts? There are many, many times when you, as a system administrator, need...

Shell scripts – What can you change

In most, if not all, shells, you have a script that starts your shell. Learn how to change it and you can have your own...

BASH While Loop Examples

Three types of loops are used in bash programming. While loop is one of them. Like other loops, while loop is used to do...